Dynamic milling with drilled entry hole

[PROG_MAN_DO]

I've drilled a hole, now I want to dynamic mill the remaining area. I've tried several approaches, can anyone lead me to the path of righteousness please..

[brandon b]

Rest mill?

[PROG_MAN_DO]

here's the file

TEMP_DYNAMIC.MCX-7

[BenK]

Create a pocket toolpath to clear the area the drill cuts and ghost it out. Use that as your rest material.

[stephensburta]

Greetings to all and sorry for my bad english, this is my first post.

 

Allow me to help at least I hope, try this solution

TEMP_DYNAMIC_2.MCX-7

[daryl_y]

You can do it all inside the dynamic milling path, use a circle smaller than you entry hole for a custom entry (circle will have to be broken into a couple of pieces to work) and use another circle smaller than your entry chain as an avoidance area.

.

[daryl_y]

Sorry forgot to attach the picture.