Mastercam X7 MU2 SP1 Release is Available

[Jim Evans from CNC Software]

We have just released Mastercam X7 MU2 SP1 for download and via the Auto Update System (AUS).

This update is intended to update Mastercam X7 MU1+ or Mastercam X7 MU2 to Mastercam X7 MU2 SP1.

• This version number for this Mastercam X7 MU2 SP1 is 16.2.1.61.
  
• This version will not time out.
  
• The sim-check date for this build is 02/28/2014 (same as X7 MU2).
  
  • (If maintenance expires on or before February 28, Mastercam X7 MU2 SP1 CANNOT be run).
    
  • (If maintenance expires on March 1 or later, Mastercam X7 MU2 SP1 CAN be run).
    

Notes about the Mastercam update:

• The AUS will ONLY update the main Mastercam X7 product. You must download separate updates for Mastercam Art, Renishaw Productivity +, Catia, power libraries, or the sample files.
  
• You can download full installs of X7 MU2 SP1 as well as the Update Installs using the link in the bullet above. Update installs must be installed on top of X7 MU1+ or X7 MU2.
  
• The Mastercam title bar will remain as X7 MU2 so check the version number using Help/About to verify you updated to X7 MU2 SP1 -16.2.1.61 .
  
• All Downloads are now located on our new website which requires registration and verification. You can start the registration process by visiting http://www.mastercam.com and clicking the Register link in the upper right corner. Part of registration requires that you link your Mastercam SIM to your web account so make sure to follow ALL the instructions displayed during the process and in the emails you will receive. You will not be able to see protected content such as the downloads until you are registered and your account has been linked successfully. Instructions for registering and linking are attached to this post.
  

Issues Addressed by Mastercam X7 Maintenance Update 2 Service Pack 1

 

Mastercam X7 Maintenance Update 2 Service Pack 1 updates the following areas:

• Custom Lathe Tooling
  
• STL files in Verification
  
• Issue with X7 MU2 install overwriting shared folders
  
• Added MastercamDotComLinking.exe to the install.
  

Issues Addressed by Mastercam X7 Maintenance Update 2

 

Mastercam X7 Maintenance Update 2 updates the following areas:

• Mastercam Simulator
  
• Toolpaths - Lathe, Multiaxis, Probe
  
• Tool Manager
  
• File converters
  

See the \documentation\ReadMe.PDF and \documentation\WhatsNew.PDF files for details after installation.

Registration-linking-instructions.pdf