Need an X7 postprocessor for Okuma Captain Lathe

[Camgal_59]

Does anyone have a lathe postprocessor for an Okuma Captain Lathe, Mastercam version X7, that they can share?

 

The controller is OSP-P200L.

I do not have live tooling on this machine. It performs lathe work only.

 

Yes ... my Mastercam Maintenance is up to date.

Yes.... I have contacted my reseller.... haven't heard from them in 3 weeks.

Gave them sample programs, etc.

I don't know if the tech is out on vacation, or training .. or whatever.

He was very helpful in the beginning to set up my new computer .. went to 64 bit.

 

Anyhow .. I NEED to be able to post lathe programs.

I don't need something custom, just something that posts to that model of Okuma.

 

Can anyone help?

 

Thanks!

 

Jo

[Colin Gilchrist]

Jo,

 

Try the Okuma OSP-7000 2X Lathe post. It should work for you. PM me your email address and I'll send you the Post Installation for X7. This is an EXE that is available from CNC Software to install all of the optional "default" posts that used to come with Mastercam...

 

Thanks,

 

Colin

[Camgal_59]

Thank you to all who gave me input for this issue! 

 

FYI ... my company is paying for my reseller to come and spend some time with me in-house ..I imagine that I'll be all set for my posts then.

[gcode]

tenten, you post was hidden, please read the faq's

 

you should be talking to your Mastercam dealer about post requests

[DanielGingras]

akamacmiles: Please speak to your local Mastercam reseller about posts.