hass 5axis post modification for indexing

[ken wong]

Hi!i try to modify hass 5 axis post come with x7 to work with mazak variaxis 5x- 16i fanuc control. So far some how it ok. because we do only indexing work 3+2 so i want to mordify some more thing to meet our need

1-how to force full retract when machine change tool plane(right now we control by force tool change)

2-how to output difference WCS :G54 G55.... when machine change tool plane (like mpmaster post in 4 axis) right now i use only g54 in centre of rotation

3-how to output G10 x,y,z  according to G54 G55....

 

Thank you very much 

 

[Sticky]

Hi Ken, I had my post modified by In House to do all of these things you mention, here is the thread about it:

 

http://www.emastercam.com/board/topic/76895-method-for-calculating-workoffsets-for-4th-axis/

 

I'm very happy with these modifications, it works great!

[ken wong]

Thanks Sticky

that is the way i do on my horizontal with that post modify from in-house for 4 axis

i dont think that post will work for 5 axis machine 

[Justin Beebe at Folsom Tool]

_Ken

 

_{In your parameters page look under miscellaneous values.  Some posts are set up to give you different retract options using miscellaneous value 1.  I would look there first.}

[ken wong]

thank i already try but not work , i will try more  in mis parameter