Line width change

[bogusmill]

The previous boss here had a little trouble seeing lines, arcs, splines, etc at the narrow setting. He used the wide setting for all those. Now I have to deal with his files and with the geometry being this wide lots of things get covered up and hard to select in a crowd. Is there an easy way to change all the geometry on a file, to the small width?

[Del.]

select all and then change attributes and change line width

[Jayson Kramer]

Left click "QM Wire" then right click "Attributes" and set them all the way you want.

[bogusmill]

Thanks Jay, that worked. Del, your way didn't work because you left out the part about right clicking the attributes button. Done that way it works too.