Mill/Turn work offset issue

[Bwank1124]

I am new to mill/turn and I am trying to program a part and pick it off on the sub spindle. Everything is fine on the main spindle I don't get any plane issues. When I transfer it over to the sub spindle and I have a milling and turning op on the sub spindle I get an error message "multiple planes use work offset #1, but planes have different origins". I haven't moved any origins or touched any of my WCS so I am not sure what I am doing wrong. I just know that the main spindle uses offset "0" so I don't think I would need two different offset numbers on the sub spindle. Any help would be great.

[Mick]

That is the Mill Turn add on. You need to contact your reseller, or CNC Software about that.

[K2csq7]

You need to tell mcam that you want to use a different work offset for the subspindle work. 

i.e. G54 for main, G55 for sub...

[Bwank1124]

Why on the main spindle can I run g54 for milling and turning operations but on the sub spindle I get the error when trying to run g55 for both milling and turning? I sent my file into QC, I have had this happen a lot so I must be doing something wrong but just not sure what I am doing.