Misc Values issue.

[cormigu]

could somebody explain to me  how misc values work? I have a trouble with this issue ,it make crazy motion in my router 5 axis. In the picture attached i put a red box around the value that i need to modify but i don't know how to do it.

 i appreacte any help.

[Alien]

could somebody explain to me  how misc values work? I have a trouble with this issue ,it make crazy motion in my router 5 axis. In the picture attached i put a red box around the value that i need to modify but i don't know how to do it.

 i appreacte any help.

Hi,

as I understand it's helpful if your preview operation ends with 270 deg for 5-th axis, and next operation starts with -90 deg for 5-th axis.

This is a same angle, but machine rotates 5-th axis 360 deg and this wasted time. To avoide this, change in misc initial secondary value to closest for start angle, for example to 250 in our case. Make change in second operation.

I hope this help you.

Best regards.

Sincerely,

Michael.

Michael.