Mill-turn Gurus's please help.

[DODGERFAN]

I'm not a mill turn guy at all what so ever.  I'm not a mill guy for that fact.

I have what should be an easy 1 tool program that I can not figure out.  would anybody like

to take a look and pull me out of the fire.  

If you are interested PM me with an email address and I will send it to you .

 

 

Thanks in advance, Ray.

[DODGERFAN]

Aw screw it, i'll post it.   

[DODGERFAN]

.

2.MCX-7

[Chipmakr]

Is this more like the motion your looking for?

2-DD.MCX-7

[DODGERFAN]

Is this more like the motion your looking for?

That's a lot closer, but its not getting the radius in the front. 

[DODGERFAN]

But I could rotate the part and repeat it.   It might work.   

[CJep]

Hey Dodger fan,.... you gots mail

[Chipmakr]

Are you wanting to roll/pivot the tool up as it comes to the front?

I don't think you will ever get exactly whats drawn without violating the part unless you use a lollipop cutter. Even then that tool might get kinda flimsy.

[DODGERFAN]

Are you wanting to roll/pivot the tool up as it comes to the front?

I don't think you will ever get exactly whats drawn without violating the part unless you use a lollipop cutter. Even then that tool might get kinda flimsy.

We are going to use a 1/2 dia adapter to give some support. 

[DODGERFAN]

Many thanks to you guys for the help on Friday.   

I ended up using what CJep sent.   and looks like it will work pretty darn well.  The only thing I don't like about it, is the fact that I cant take the credit for it.        Thanks again.