mastercamx8 Gview:ISO WCS:TOP T/C plane TOP

[mcdoggie]

please help i want to place tool and construction plane indicator on my m8 workplace like the one in x7

[crazy^millman]

Alt-F9 or you can add the button that toggles it.

 

HTH (Hope that Helps)

[mcdoggie]

thanks 5th thats awsome!,

 

i prefer the way they have it presented in mastercamx7. please see attach screen shots

 

 

[Jayson Kramer]

So you don't want the Gnomons showing like in the shot of X8? I have to ask why not as that is a helpful and useful tool to have.

By the way to turn off the settings are in the Setting, Configure , then under the tree to Screen and on the right there is a check box.

[mcdoggie]

as a newbie playing around on multiaxis i find it more usefull the setting of mastercamx7 as 'Gview: ISO WCS:TOP T/C plane TOP'

 

the presentation in mx8 is okey and the feature for turning it on and off is fine no hazzle in doing it.

 

i like the presentation in mx7 i can affirm my location in wcs and t/c plane by seing it written in words.

 

in mx8 i sometimes becomes confuse seing gnomon on four corners and on the geometry i' m working on.

 

if mc people could include in config setup an option in selecting the mx7 presentation for wcs t/c plane location it would be more users friendly for newbie like me.

[crazy^millman]

If you look at your X that has been moved to the Lower Left Corner of the Software out of the Graphics Screen. Took me a little to get use to it, but I like where it is now.