EIA / Mazatrol Programs

[SpecialtyTool]

We do most of our programming at the machine using Mazatrol conversational. However, we sometimes include EIA programs as sub routines. I can't remember how to make the sub EIA program return to the Mazatrol program. I'm wanting to say there is an M code at the end to return to the main program. Any help is appreciated.

 

Thanks

[djstedman]

I would assume its an M99 at the end of the subprogram just like a regular sub-program in an EIA program.

 

I haven't used Mazatrol in a long time though so I cant be positive, but I seem to recall that subs still worked the same way when called from Mazatrol .. ie M99 still being the return to main program

[K2csq7]

M99 is what I used when I did that....

and it worked...

[Madsen66]

(  NC BOR 12 mm )
N1130 G0 G90 S6000 M03
N1140 G90 X150. Y-19.995
N1150 G43 Z5. M08
N1160 Z2.
N1170 G1 Z-5.1 F200.0
N1180 X275. F1250.0
N1190 X275.004 Y-19.996
N1200 X275.005 Y-20.
N1210 X275.004 Y-20.004
N1220 X275. Y-20.005
N1230 X25.
N1240 X24.996 Y-20.004
N1250 X24.995 Y-20.
N1260 X24.996 Y-19.996
N1270 X25. Y-19.995
N1280 X150.
N1290 X151.
N1300 G0 Z5.
N1310 M09
N1320 G91 G28 Z0.
N1330 M99
%