Hi Is there anyone who has an idea of where to buy a slice mill for alu with R7,5 mm on the cutting edge. the diameter is not important

# Rekd ™ It does not work here

Nickc Your method of circle milling seems to work for me But thank you both for the help

C^Millman i cant get it to Work :-(

Contour milling When you chain the bottom of a flat hole and select the chain feature, to select all of holes at same diameter Mastercam select chains both the top and bottom of the holes can I force Mastercam to only make the chaining in one plane

It was just precis crosshairs color I could not find I thank you for your help

It was just precis crosshairs color I could not findI thank you for your help

in X9 How to change the origin collor I can not figure out where Med venlig hilsen Palle Madsen EME - etiketteringsmaskiner ApS

( NC BOR 12 mm ) N1130 G0 G90 S6000 M03 N1140 G90 X150. Y-19.995 N1150 G43 Z5. M08 N1160 Z2. N1170 G1 Z-5.1 F200.0 N1180 X275. F1250.0 N1190 X275.004 Y-19.996 N1200 X275.005 Y-20. N1210 X275.004 Y-20.004 N1220 X275. Y-20.005 N1230 X25. N1240 X24.996 Y-20.004 N1250 X24.995 Y-20. N1260 X24.996 Y-19.996 N1270 X25. Y-19.995 N1280 X150. N1290 X151. N1300 G0 Z5. N1310 M09 N1320 G91 G28 Z0. N1330 M99 %

Thank for sharing

Me too :thumbdown:

Hi If you write something in the manual data input I write tool offset as here (G10 L12 P90 R5.05) it may not come with over in the mirroring ???

Hey Mastercam X Getting Started Guide (spiral-bound book in the box)? I didn't get it ???

Hi, I have used MasterCam version 9 for five years now. I’ve experienced an error while mirroring or copying. After inserting manual data eg. G10 L12 P120 R5.00 in the master drawing, the manual input disappears in the mirror or copy. Anyone gor any ideas? Regards, Palle -------------------- Mill Level 1 X2/Solids Version 0.17.1.235 Windows XP Sp1

Thank You for your help ???