Help with Flowline please

[AMF]

Hello all,

 

I'm trying to stitch from the top down.  The toolpath starts at the bottom of the radius and works up.  How do I change this?

 

Thank you,

 

AMF

PART ONE.MCX-7

[crazy^millman]

Have you ever changed the flowline parameters before? Bottom of the Toolpath/Surface Selection Dialog box is the place to change the flowline process. In there you have 4 options to change offset, Cut Direction, Step Direction and Start. I use this all the time in this toolpath.

 

Here is the file back changed:

 

HTH

Edited August 19, 2015 by 5th Axis Consulting