Tool Selection window

[Zbuilder]

Anyone know why X8 save the column positions in the Tool Selection window like the past Mastercam versions? Was this left out on purpose or just forgotten? Our shop doesn't need the Assembly or Holder columns & would like them slid out of view but Mastercam always brings them back to it's own default. I even found the key for those columns in the registry. I would change them and even delete them but they came right back. (and yes, I exported those registry branches before changing them.  )

[Guest]

I just rearranged mine and they stick

[daryl_y]

When you slide the columns around do not slide them so far that you completely eliminate the unwanted column.  If you leave a little space your changes will stick.  For me the last few versions of Mastercam have acted this way.

[Zbuilder]

Thanks daryl_y, that worked. Hopefully it will "stick". I had X6 that would always change something in my configuration file. I see no sense in allowing a user to save changes only to have Mastercam change it. I finally had to make it "read only" and also modified the permissions to deny any changes and that prevented Mastercam from changing it.

[Matt Berube at Ferron Mold]

When you slide the columns around do not slide them so far that you completely eliminate the unwanted column.  If you leave a little space your changes will stick.  For me the last few versions of Mastercam have acted this way.

Oh that helps tremendously!  Thanks!