Dynamic offsets & G05.1

[So not a Guru]

Can G05.1 high speed smoothing be used in conjunction with G54.4 dynamic offsets?

I noticed that there is an option to for using "Control high speed machining (read by post only)", in the control definition.

 

Zeke

[Guest MTB Technical Services]

Can G05.1 high speed smoothing be used in conjunction with G54.4 dynamic offsets?

I noticed that there is an option to for using "Control high speed machining (read by post only)", in the control definition.

 

Zeke

 

 

If you are asking about the actual machine using a FANUC Control, the answer is yes.

 

Certain smoothing options are only available on the FANUC 31i-A5 because of processor speed.

None of the AICC/AIAPC or Nano Smoothing options are limited by WSEC.

[So not a Guru]

If you are asking about the actual machine using a FANUC Control, the answer is yes.

This is actually for a Mazak Matrix control.

[Guest MTB Technical Services]

This is actually for a Mazak Matrix control.

 

 

You can safely assume the same answer.

[GPC_CNC]

I've succesfully used G61.1, G5 P1 (high speed machining) and G43.4 with G54.4 on our Matrix controlled Variaxis a few weeks back. I'm not sure about G05.1 though. I can't find it on my G-Code list, but I had thought that was a fanuc code.

 

Greg