Never Noticed This Before

[Tinyfxds]

Look at the icons under the geometry for the two tool paths I have expanded.  I don't ever remember seeing the icons next to Geometry before.  What does that mean? 

[Guest]

Any surfacing paths will show you how many faces are picked as drive surfaces....

 

You will also see listed check surfaces if you  have any picked

 

You'll see how many containment boundaries that you're using..

 

Also will list start points

 

2D paths will show the number of chains

Drill Ops, the number of points

[Tinyfxds]

Would I have had a display setting checked or unchecked that would not show these?  I swear I've never seen these before.  Or, maybe I'm just blind and they've been there the entire time

[Guest]

If you have these 2 unchecked, you'll see the geometry listing just to the left

 

[Colin Gilchrist]

Notice that there is a plus sign next to the geometry icon to "expand" the list. You probably are used to having it collapsed when you view it. If the option is not expanded, you'll only see a single "geometry" icon.