Tool Libraries

[Thee Dragracer1951]

Does SGS offer a Mastercam tool library?

I'm working on a large 21S Ti and 6AL4V Ti project.  The Shop Mgr has had good results using SGS cutters, 

I haven't contacted SGS yet but also haven't found any info on their site.

As always...Thanks in advance

[crazy^millman]

Not that I am aware of. Take some work to create one, but well worth the effort in the long if that is going to your library of choice. I also recommend either copying the tools or create them in the holder library you will be using for the machine. I have gotten away from the standard libraries. All holders got added with no regard to naming to organization. By use the holder library as your base then you know what holder you are working with verses trying to sort through all the clutter. Originzation is always the hardest work upfront, but one of those that pay dividends well worth the effort put into from the beginning.

 

HTH(Hope that Helps)