I NEED HELP WITH MY POST.

[ohdanny79]

I CHANGED MY 5 AXIS POST WITH B AND C AXIS.

EVERYTHING IS OK . BUT X AND Y HAVE TO SWITCH POSITION.

  EX) X3.5 Y-1.5 TO Y3.5 X-1.5 

IF SOMEONE WHO KNOW WELL ABOUT THE POST, PLEASE HELP ME...

[Colin Gilchrist]

Your Reseller can help you get your post issues fixed.

[ahaslam]

Colin, Couldn't the person just change his fmt  X  2   xabs to fmt  y  2   xabs and do the same for Y?

This I guess could cause problems with the g17,18,19 planes...

This does sound a bit more like a reseller issue.

[Guest]

Colin, Couldn't the person just change his fmt  X  2   xabs to fmt  y  2   xabs and do the same for Y?

This I guess could cause problems with the g17,18,19 planes...

This does sound a bit more like a reseller issue.

 

On a 5 axis post especially, you would be asking for a MAJOR issue

[ahaslam]

 my newb is showing!

[Colin Gilchrist]

When I see a post like this, it gets my suspicions up that this might be a pirate, running a cracked license of Mastercam.

 

1. The user has 3 posts total on the forum.
2. The user is using ALL CAPS, so they aren't aware of any forum etiquette. This isn't really a big deal normally, but it is kind of a red flag that they aren't familiar with protocol around here, and...
3. The post has poor grammar. I'm not one to be a spelling Nazi, but this often indicates that someone in a foreign country is using Google Translate to make their post.

 

So, take all together, I think this person might not be on the "up and up", hence my immediate suggestion about the Reseller. Notice that their post was three days ago, and they haven't been back yet?

 

I love helping out, but I also try to always be sure that my help is going to legitimate Mastercam customers...

[ahaslam]

I see, I am glad you are keeping up on this.

[The Cathedral]

His last post in February was great:

 

...

 

Very succinct, ohdanny79.