Post processor info

[h2o fowler]

Looking for information on post editing besides the Mastercam user guide. If anyone knows of any books or web pages, it would be greatly appreciated.

Thanks

Mark

[cam-home]

The file "mcam8chooksmp.hlp" may be has help for you.

[The Ghost In The Machine]

quote:

---

Looking for information on post editing besides the Mastercam user guide. If anyone knows of any books or web pages, it would be greatly appreciated.

---

Get a hold of your Mastercam Dealer and ask about the post manual for v7. I don't believe there is one for v8, but the posts have not changed much, if at all. A couple of years ago they cost $75, so you may be able to pick one up cheaper than that.

------------------

The Ghost In The Machine

[Ken Potter]

The Latest book is Sept 97 Mastercam postprocesser Mill lathe wire.. cost me 35$ from My dealer.

 

If there are any more up to date post books , PLease give a shout out !

 

Kenneth Potter

[cadcam]

there are nop new updaters sense then ken.

but there is going to be a user frendly post maker coming out from mastercam for all use mastercam user's .

looking forward to it.

i am not sure of the release time just yet.

the last post book was from ver 5.5 no new release sense.

------------------

jay/ aka cadcam

Precision Programming

cnc programming &

Predator reseller

email: [email protected]

web: www.ppcadcam.com

[This message has been edited by cadcam (edited 04-07-2001).]