post help!

[ender comlekci]

i need post processor for fanuc 18imb system,i can use YCM-V56T SUPERMAX and i have this machines post but it's not 15000 feet rate

[Toolfab]

LMAO

 

Have you cantacted your dealer? FANuc you say...

 

 

[robk]

The post is on your Mastercam install disk. Sure, you might have to tweak it, but that would be another thread.

 

Rob

[chris m]

Fanuc 18 is a pretty rare control; might be a custom job

 

Can you be more specific about what the problem is with the post you already have? Maybe we can help you tune it up.

 

C

[SVO]

I'm using that exact machine with a fanuc 18 to cut electrodes. I believe our post came from a v7 cd and has since been updated from each release to v9. I personally tweaked our post to suit what we wanted. I'm not grandstanding here, as I have zero post-weaking experience. My point is this. The fanuc post on the cd will work with very little changing. If you have a genuine cd that is.

 

Dan