Reverse Post in Ver 8.1

[gvsudhakar_otl]

Hello Users

Did you guys out there noticed that Mastercam Mill Version 8.1 NCUtils - Post Proc - does not contain Reverse option.

The Help of Mastercam Mill Version 8.1 displays in How To? the following way

Creating an NCI file from an NC file(Reverse Post Processing)

If you have an NC program, you can create an NCI file from it. NCI operations can be imported into MC8 files and can be backplotted.

1. Choose Main Menu, NC utils, Post proc, Reverse. The Specify File Name to Read dialog box opens.

2. Select an NC file to reverse-process and choose OK. The Specify File Name to Write dialog box opens.

3. Select or enter an NCI file name to write and choose OK.

Note: The active post processor must be a reverse post processor, which will usually have a name beginning with “R”.

Also Mastercam Version 8.1 Post Processor Installation also does not provide any Rpposts.

Hope somebody noted the above problem earlier.

Sudhakar

Onward Technologies Limited

India

[Carl Vallance]

Check out the following link. It covers this subject.

http://www.eMastercam.com/ubb/Forum1/HTML/000741.html

------------------

Val