osp5000 memory problems

[brandon hatch]

ok so i know this has been spoken about in the past but i have had no luck finding a problem to my issue.

i have a late 80s okuma MC50H with a osp5000m-g control i have a program thats 84k and i have 67k in my main bubble memory "bb1" so i was able to load it into my "bb0" memory just fine i can edit it there and thats it. when i tryin run my program out of BB0 i get an alarm program buffer overflow alarm 1 ive tried creating a sdf file and running it from there and have had no luck 

any help please and thank you. 

[mkd]

need to break up the program into two or more pieces.

same weirdness on osp7000

 

you can have the/a schedule program call them in sequence.

[T_MALENA]

yep like mkd said.  Break it up into a couple smaller programs. I've done the same before and had the finish tool (in my case the bulk of the prog size) as the only part in bb0:  So your main program is on bb1:   Then you schedule select your program.  when you run from bb1 you can select a program as a.min - BUT you need to specify bb0: bigone.min

 

Actually kinda cool since bb0: is massive compared to the main side.