Post for DV5100 3 + 2 axis

[Hieu Nguyen_45077]

I'm using generic post from MasterCAm. Is there any way to change the post to get secondary rotary with always positive number? Meaning it does not need to telling the machine which direction, because machine can always read positive number. The range direction from -5 to 105 degrees.

 

If anyone can change please help with it.

 

Thank you very much.

[crazy^millman]

Depends on the post. I suggest a call into your re seller or an email. They can point you in the right direction.

[Hieu Nguyen_45077]

For example:

when it rotates from B0 to B90 (I got positive B value)

when it rotates from B90 to B45 ( I got "B-45", it mean it tells machine go negative direction)

but the machine does not need to have " - " in it, so machine can rotate back to B45, do you think can you edit it?

 

Please,

Thank you.

[crazy^millman]

Again depends on the post and the version and other things. Without having a sample programs and a post to test it hard to know. You can make a .z2g and put it up here making sure the post is used and then someone would have a better idea on how to help.