Control Cutter Compensation Output

[moovi]

Hello! Faced with the problem. Is it possible to output G41 / G42 in the first contour block, but not in the block of the approach?

 

Now I have it:

%
;PROGRAM NAME - PRT0001
N1 G71
N2 G17 G90
; FLAT END MILL - 8
N3 T5 M6
N4 S13448 M3
N5 G0 X-8. Y-15.
N6 Z10.
N7 G1 Z-10. F1000.
N8 G41 X0. F2980.1
N9 Y0.
N10 Y90.
N11 G2 X10. Y100. R10.
...

That's what I need

%
;PROGRAM NAME - PRT0001
N1 G71
N2 G17 G90
; FLAT END MILL - 8
N3 T5 M6
N4 S13448 M3
N5 G0 X-8. Y-15.
N6 Z10.
N7 G1 Z-10. F1000.
N8 G44 X0. F2980.1
N9 G41 Y0.
N10 Y90.
N11 G2 X10. Y100. R10.

Thx!

[crazy^millman]

Welcome to the Mastercam forum. :D

 

Need a lot more information to help you with this problem> Ca you make a sample file and post it up so someone can see how you want about creating the operations? Could be as simple as a lead in/out not being done correctly in the operation to something else and since you #1 didn't tell us a Version Hard to know what Version. #2 Didn't give us an operation type hard to know what operation you are seeing this with. #3 Didn't tell us what your exact issue is hard to know what reason you want to do this which will help someone help you to either see if it is a posting issue or a programming issue in Mastercam #4 Didn't tell us what you have tried to solve you problem.

 

Please help fill in some of the blanks and then someone can better assist you in helping you solve your issue. Merry Christmas.