Thermwood 5 Axis

[Greg Williams]

Hi All,

 

Happy new year to the forum. I am trying to setup a post for a Thermwood 90 and I am having some trouble getting a sample piece of code. Does anybody have some 5 axis code from a they can share? Ideally something from a Mastercam file would be very helpful

 

Regards

Greg

[mkd]

PM sent

( Tool count: 1 )
G90 G70 G40
G96 G43 G46
G990
M999
 
G09 F6
G800
 
(  ************* START PROGRAM CODE *************  )
(  1/2 FLAT ENDMILL   TOOL - 13  DIA. OFF. - 0  PIVOT LEN. - 12.77  DIA. - .5 )
G90
G52L1
G70
S10000
T13
M3
M31
G1 G90 C95.257 B25.924 F1200.
X-2.455 Y-12.5348
G47
X-2.455 Y-12.5348 Z17.3963
G1 X-2.455 Y-17.1984 Z8.6254 F1000.
X-2.439 Y-17.3725 Z8.2657
X-2.423 Y-17.5467 Z7.9059 F30.
X-2.3886 Y-17.5792 Z7.9232 C94.917 B25.753 F80.
X-2.3653 Y-17.5984 Z7.9334 C94.683 B25.653
X-2.341 Y-17.6164 Z7.9429 C94.436 B25.559
X-2.3156 Y-17.6331 Z7.9519 C94.176 B25.471
X-2.2893 Y-17.6486 Z7.9601 C93.905 B25.39
X-2.2622 Y-17.6628 Z7.9677 C93.622 B25.316
X-2.2344 Y-17.6755 Z7.9746 C93.331 B25.25
X-2.2059 Y-17.687 Z7.9808 C93.031 B25.191
X-2.1769 Y-17.6971 Z7.9862 C92.725 B25.139
X-2.1475 Y-17.7058 Z7.991 C92.413 B25.095
X-2.1178 Y-17.7131 Z7.995 C92.096 B25.059
X-2.0878 Y-17.719 Z7.9983 C91.776 B25.03
X-2.0577 Y-17.7237 Z8.001 C91.455 B25.009
X-2.0275 Y-17.727 Z8.0029 C91.132 B24.995