sub programs

[Elad]

Hi,

I experienced a serious problem with the subprograms :

After sending the program to the machine,i had to do a simple contour and after that few holes.

I made the contour with no problem,and when the machine had to do the drilling,i got an alarm message.

After chacking the gcode,i found out that the drilling subprogram is the same subprogram of the contour (it tried to use G42 for drill ).

and here is my problem :

I'm sure it's not a problem with my post! i always use subprograms,and i had this problem twice!

After restarting the computer,and making gcode again,the problem was gone!

What's going on here??

 

[cadcam]

(What's going on here?? ) Gremlins

------------------

jay/ aka cadcam

Precision Programming

cnc programming &

Predator reseller

email: [email protected]

web: www.ppcadcam.com

[Guest CNC Apps Guy 1]

I concur with Jay.

------------------

James Meyette

[Allan Brown]

If it happens again, try posting the same file with Mpfan or the latest Mpmaster. If theses posts handle the file correctly, your post should be updated.