Verify doesn't match the Backplot Multi-axis

[Grimes]

I'm pulling my hair out. So i bought the multi-axis essentials, totally cant figure it out. First tutorial went fine. The second the drilling the holes using axis substitution worked, the part rotated. When using rotary axis positioning, Im sure I followed everything right, the back plot looks good tool moves around the part, but when I verify it the tool stays on the top view, and trys to drill all the other holes, massively running into the part. Ive tried on three different computers using demo 2017 and 2018.

 

In 2017 it says to use generic fanuc 4th axis vmc, in 2018 I'm assuming you just use the default cause theres only two to choose from.

 

I downloaded the ebook sample from here using the same axis substitution and the groove from the first tutorial and worked fine too.

 

Must just be one click im missing, a problem somewhere between my computer chair and keyboard lol.

[Leon82]

Multiaxis drill does that for me too. 

 

On 2018 it will give you a warning about it.

 

 

[DanielGingras]

Hello Grimes,

Can you attach your file? I'll open it on my system and take a look

[Grimes]

Thanks Daniel, dont understand why it doesnt work, its only the second tutorial. Thanks anyway

[DanielGingras]

Hi Grimes,

Thanks for sending me the file. After testing the file in the Home Learning Edition software and in my copy of Mastercam using my dealer sim, it appears to be a glitch for the 2018 HLE software. I tested it in the beta of Mastercam 2019 and it verified correctly there. The Mastercam 2019 HLE should be released shortly so you could try verifying your file there as well after it's been released.

[Grimes]

i downloaded the 2019 copy but havent installed it yet, if it happens again, it must be something wrong on my end. will let you know.