offset issue

[Fabio1]

Hello all

Due to the large number of tools and a limited magazine size, I have to use different "H" values in relation to the "T" tool number. example T23 is my taping head so I have to use H23, H63,H103 for the different tap lengths used on the same tapping head. Mastercam is generating the same "H" number as the "T" number regardless of what is set in the tool library. For example 1/2-13 tap is T23 H103, but when the program is posted, it will come out T23 H23. It only started doing this recently. Where are the settings to read from the library and not default the H to the T number.

Thanks

[Roger Martin from CNC Software]

Check the Tool Offset Registers setting the Control Definition.
It's on the Tool -> Mill topic page.

[Jayson Kramer]

Here is a snap shot of what Roger is talking about.