Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

2D dynamic won't entry ramp


SlaveCam
 Share

Recommended Posts

1 hour ago, David Colin said:

But as you just said circle mill won't do it I'm not sure to understand what tool motion you need to get... 

We do a lot of circular pocketing with a large indexable drill as a pre-rougher, and the rest is taken out dynamically with an endmill. But first it has to ramp down to get flat bottom. Circle mill would do, but as I said, there is no air regions and without air regions, there is plenty of air cutting.

It's always two ops, no less!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...