Thank you for the answer. 

The problem is that worked on mill with Heidenhain system, and I got this machine to do the job and learn myself in the process. 

I will call reseller and send me same file and try to explain :) 

I do have VTL planes in mastercam.  

I will post here as soon as I solve the problem. 

Have nice day all!

@crazy^millman

What am I doing wrong? 

test20220412.ZIP

test20220412.MIN

@AHarrison1 I do use plane +x -z and that is only the one that works.

@crazy^millman must ask, if they let me I will share file.

(Alreday have such file on PC but have to have permission to do it)

Otherwise I will not be needing mastercam or the g codes

I use original mastercam, trust me. 

The machine that I am talking about is VTR 350a, not the usual lathe machine. So that can be a problem?

I don't want to mess with machine parameters, it can be very dangerous. 

Regards 

I will try this and see if  it works. 

( I was working on milling machines for past 9 years. This is my first couple of weeks on mill/lathe machine and also I was using heidenhain, not OSP)

I have but, file I can not share.

I did call reseller, he says should work.

(I did not call again because I think it is my fault)

123_220201_070821.pdf

Nope.

I do simulation on the machine and use the program. 

But still is G2 counterclockwise and G3 clockwise.  

I will try it tomorrow. 

Thx

I know, but if i use those in the right way,  machine cuts in the material.

Hello, 

I will apologize because English is not my first language. 

The problem I have is with Okuma vtr 350a

 Movement of the machine is:

G2 - counterclockwise 

G3 - clockwise 

Anybody nows what is the problem.