how do i upload the mcam file? Im about to try the pocket mill and see what that does. But ill also double check the O.D! update: that was the problem :D.

Hey everyone, Attached below is a part i am working on. I am 100% self taught and just now getting into slot milling. For some reason the two smaller slots arent cooperating while the big slot worked just fine. Did the big slot same exact way in the vid. Really confused and need help! Thanks in advance!! Recording 2023-09-27 081817.mp4

Hey everyone, Quick question. is it possible to upgrade the memory storage on a 87' Leadwell MCV-1300p. Trying to run a big program without having to break it up and theres not enough storage to run it all at once. Thanks in advance.

Holy crap thank you! So that section did up working! For everyone wondering why i dont go in on mastercam and fix it, the machinist that was at the company for 30 years was very old school. Programmed all on the machine. wasnt till a few years ago he started doing all this on the computer and almost everything is a 2D wire drawing that are hard to read. Still learning how to make them solids so i can read and understand better! Will definitely be using the links you have posted to help me out!

N76 M01 (T3- 3/8 EM./D21) N77 G0 G90 X7.301 Y-.315 S2700 M3 N78 G43 H3 Z.1 M8 N79 G1 Z-.271 F42. N80 X4.4995 N81 Y-.5062 N82 Y0. N83 X3.9013 Y.2715 S2800 M3 N84 G1 Z-.475 F42. N85 G41 D3 X3.8388 Y.1633 N86 G3 X3.8305 Y.132 I.0541 J-.0313 N87 G1 Y.0852 N88 G3 X3.8564 Y.073 I.026 J.0215 N89 G1 X4.0941 N90 X7.1063 N91 G2 X7.2495 Y.0137 I0. J-.2025 N92 G1 X7.3045 Y-.0414 N93 G2 X7.3638 Y-.1846 I-.1432 J-.1432 N94 G1 Y-.4454 N95 G2 X7.3045 Y-.5885 I-.2025 J0. N96 G1 X7.2495 Y-.6436 N97 G2 X7.1063 Y-.7029 I-.1432 J.1432 N98 G1 X4.0941 N99 X3.8721 N100 G3 X3.8391 Y-.7298 I0. J-.0337 N101 G1 Y-.8013 N102 G3 X3.8471 Y-.8313 I.06 J0 N103 G40 G1 X3.9071 Y-.9352 N104 G0 Z.1 N105 X3.8863 Y.2715 N106 G1 Z-.488 F42. N107 G41 D3 X3.8238 Y.1633 N108 G3 X3.8155 Y.132 I.0541 J-.0313 N109 G1 Y.0852 N110 G3 X3.8564 Y.058 I.041 J.0215 N111 G1 X4.0941 N112 X7.1063 N113 G2 X7.2389 Y.0031 I0. J-.1875 N114 G1 X7.2939 Y-.052 N115 G2 X7.3488 Y-.1846 I-.1326 J-.1326 N116 G1 Y-.4454 N117 G2 X7.2939 Y-.5779 I-.1875 J0. N118 G1 X7.2389 Y-.633 N119 G2 X7.1063 Y-.6879 I-.1326 J.1326 N120 G1 X4.0941 N121 X3.8721 N122 G3 X3.8241 Y-.7283 I0. J-.0487 N123 G1 Y-.8013 N124 G3 X3.8321 Y-.8313 I.06 J0 N125 G40 G1 X3.8921 Y-.9352 N126 G0 Z.1 N127 X3.9226 Y.1288 N128 G1 Z-.27 F32. N129 G41 D3 X4.0308 Y.0663 N130 G3 X4.0621 Y.0579 I.0313 J.0541 N131 G2 Y-.6879 I0 J-.3729 N132 G3 X4.0321 Y-.6959 I0 J-.06 N133 G1 G40 X3.9292 Y-.7559 N134 G0 Z1. M9 N135 G91 G28 Z0 M5 N136 T4 M06 N137 M01 (T4- #29 DRILL) N138 G0 G90 X4.8819 Y-.315 S2500 M3 N139 G43 H4 Z-.2 M8 N140 G99 G81 Z-.35 R-.2 F22. N141 X6.063 N142 G80 M9 N143 G91 G28 Z0 M5 This is what im working with. Originally designed for a Leadwell vertical cnc mill, i have to transfer it over to a Haas VF4. theres slight differences that ive changed but n108 worked only to stop at 110. Same code. Ill be watching and learning as much as i can but any guidance would help!

I think I see what youre saying, Just changed the X3.8288 to X3.8288 in N107, didnt work. will now try changing the x in N108 and see what that does

Will learn more how the G2/G3 code works. I wouldn't mind reading what you have to say though. I am currently using Mastercam CodeExpert. Any more explanations Ill gladly read and figure out!

Hey evryone! Newish to the programming world but ive ran many machines in the past; setup, touchoff, toolchange, etc. Currently was thrown into a position where I have to edit programs basically by myself. Current program threw a error code 304. im stummped on what to do. below is the code. It starts on N83 and throws the code at N108. Any help would be greatly appreciated: N83 X3.9013 Y.2715 S2800 M3 N84 G1 Z-.475 F42. N85 G41 D3 X3.8388 Y.1633 N86 G3 X3.8305 Y.132 I.0541 J-.0313 N87 G1 Y.0852 N88 G3 X3.8564 Y.073 I.026 J.0215 N89 G1 X4.0941 N90 X7.1063 N91 G2 X7.2495 Y.0137 I0. J-.2025 N92 G1 X7.3045 Y-.0414 N93 G2 X7.3638 Y-.1846 I-.1432 J-.1432 N94 G1 Y-.4454 N95 G2 X7.3045 Y-.5885 I-.2025 J0. N96 G1 X7.2495 Y-.6436 N97 G2 X7.1063 Y-.7029 I-.1432 J.1432 N98 G1 X4.0941 N99 X3.8721 N100 G3 X3.8391 Y-.7298 I0. J-.0337 N101 G1 Y-.8013 N102 G3 X3.8471 Y-.8313 I.06 J0 N103 G40 G1 X3.9071 Y-.9352 N104 G0 Z.1 N105 X3.8863 Y.2715 N106 G1 Z-.488 F42. N107 G41 D3 X3.8288 Y.1633 N108 G3 X3.8155 Y.132 I.0541 J-.0313