JSAussem
-
Posts
26 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by JSAussem
-
-
I have, but the boss wants to see it(the machine) tap!
-
Thanks Mark!
-
JParis,
You have mail.
-
That’s my next issue. I am running a Mori Seiki DuraVertical 5080. It’s a good size machine but I reading the manual right now to try and figure out there synchronized tapping cycle and hp range.
-
Thanks John,
It is a cutting tap (spiral), programming in metric and only have to go about 70mm deep.
I have not visited the forum in a while but what happened to the Patriot's logo?
John
-
I have to push a 30mm x 3.5 tap thru a block of 1018 CRS, any recommendations on speeds and feeds? I'm running a Mori Dura Vertical. I have no experience with metric taps and since this is so large I would like a second, third or fourth opinion. Right now I have it programmed for 2100.0 feed at 600 rpm.
Thanks
-
Has anybody ever had any experience(good or bad) with these machines? OKK Machine Tools. (www.okkcorp.com)
I have been told that they are "top of the line Japanese machine tools" Any input would be helpful.
Thanks
-
Thanks Todd.
-
X2 recieved on 11/16
-
Im hell with numbers, but that readin and writin get me every time! Thanks Again.
-
Thanks Mike!
-
Sorry, I ment run time or cycle time for selectefd operatins.
-
Does X give a run in back plot?
-
Yes,I did. Thanks, Gcode!
-
I know this is a simple/stupid one but here goes! Yesterday when I opened up MCX MR1 Mill 3
Solids, the background in my operation manager was a dark blue. Looks pretty cool but it's hard to see the black tool icon. Im not sure what I did to get it this way and Ill be D#@$ed if I can figure out how to get it back. I looked under Settings/Config/Colors but didn't see anything that applied to the op manager. How do I return it to a white background?
Thanks,
John
-
Thanks Guys
-
Does X have a "backup" button, similiar to the one above main menu in 9.1?
Thanks
-
Thanks one and all,
Ill will also take a look at the pdf.
Thad
John
-
Thanks David,
That was it.
-
I just recently started to run X MR1. One function that I haven’t been able to find and I used to use quite often in 9.1 is the curve to arcs. I would use this to convert splines to an arc. I just brought in an iges file and I ended up with a bunch of nurb splines. When milling contour the mill jerks it way through all the little moves. Any suggestions on how to smooth it out would be appreciated.
-
Thanks Guys! That did it.
-
Thanks,I will try that.
-
Hey Guys,
New to fourm and to using X. I tried to run servicepak001updat003 and came up with the error:
1) Internal Error 2715.cmax.dll
After clicking OK the second error:
2)Error-1603 Fatal error during installation
Consult Windows installer help(Msi,chm) or MSDN for more info.
Our in house IT was no help!
Any siggestion? Thanks in advance, Jack
-
Hey Guys,
New to fourm and to using X. I tried to run servicepak001updat003 and came up with the error:
1) Internal Error 2715.cmax.dll
After clicking OK the second error:
2)Error-1603 Fatal error during installation
Consult Windows installer help(Msi,chm) or MSDN for more info.
Our in house IT was no help!
Any siggestion? Thanks in advance, Jack
doosan horizontal ?
in Industrial Forum
Posted
Hey Sig,
Mori NH4000DCG is a great machine. Send me an email with the specifics that your looking for.