J.Keilman,

The way you it fine, but you need to know tool Dia. and don't have change to control Dia offset.

I do similar idea with you, but I create a circle same as the finish diameter plus spiral with the correct step over and use contour with comp. = Wear and turn off " infinite look ahead ". You can use lead in/out if you want to.

____

Unchecked rotary axis

____

Cimco Here,

We use full version of Cimco4, there are a lot more features like: File compare, Backplot, Rotate, Translate, Adjust Speed and feed ...

You are welcome

Check your mail box

That option is not stay (stick), If next time you open Mastercam. So many of us may missed that option. Why don't it stay in Chain menu

Qmp

You got mail

Garrjess,

In Chain menu, click small arrow on top left corner, it will give you option to back up

Try it out

Send them to me,

I will do it for you

qmp

Chris

We do alot of thread mill here, With X2 So far we don't have any problems yet. What size of thread hole you want to mill and tool Dia ? Let me know I will take a look.

Qmp

I created a short cut key F10, So to toggle on or off by press F10

Billet,

I didn'd have MR1 loaded in my PC now, But if I rememmbered correctly, In Backplot option ,tool/ profile/ auto or as defined, Check As defined.

Qmp

Good morning all

It was fixed in Vericut V6.03. Check Web page below

Link

VERICUT 6.03 is Now Shipping

Link

Qmp

Rickster,

You can use Screen Grid option. I think that what you looking for .

Turn on Grid on screen and use create spline

Qmp

Both Solid and surfaces work the same on HSM, but I prefer Solid.

Thad,

I tried it out and got same problem. The option "depth filtering" feature doesn't work. I use Mask on arc > window , it pick all arcs, doesn't matter what depth.

Setting > Config > CAD settings ...

There are some option in this parameter

Thanks Glenn, and thanks everyone with yours

opinions

We hope it will fix in near future

Thanks

We got same problem here, and we found the way to get around for now.

Set as ccw and take out - (minus sign) in spindle speed, You will get M04

Pat

With Mpmaster Post. We send the tool home for any of rotation

Pat

We did a lot of jobs same as you asking.

What we do:

Set up T/plane normal to line then Toolpaths > Circle paths > Circle toolpath pick a point. In Circmill parameter enter Dia in Circle Diameter box, Set the Depth = 0 and incremental

Pat

Thanks

Printing viewports (two or more views in one page)

Does it work in X MR2 ?

Qmp

Somehow your post setup not right for feedrate (*fr)

some canned cycles use *fr, some use pplunge

Change *fr = pplunge, You should be fine

and contact your reseller for new post.

Pat

Today I got crash on my computer, I test same file on the other 4 computers. the same problem occured.

The file in ftp site MCX_files/4 AXIS TEST.MCX

Part is a restangular block, just mill and drill four sides, using T/plane and C/plane with fixture offsets for each sides. when I open in McamX and go to File/New or click on icon New file, MasterCam crashing. " The memory could not be "read"

The strange thing the file is fine, I can backplot, verify and out put NC files and keep go on..., no problem happen. It only crash when I hit Icon New

Somebody Can dupplicate it?

Use: X MR1/WinXp Sp2/Geforce FX 5700

Pat