Cuda340
-
Posts
5 -
Joined
-
Last visited
Never
Cuda340's Achievements
Newbie (1/14)
0
Reputation
-
I have air brushed on the back of my lift Dodge. If you can't stop, Smile as you go under!
-
Thanks, cadcam and trevor. i will try both ways and see which will finish better. i'm very new to this cam stuff. i'm use to writing it by hand. so thanks again
-
i have level 3. the part has 6 boss 2 of which are round and 3 shallow pockets with no sharp corners all radius, and it all lies in the top tool plane. so for this should i scallop the part? being that contour dosen't do flat horizontal surfaces. or what info do you need?
-
well i think it would be multisurface? the model has 147 surfaces and i need to blend in alot of areas.
-
i want to over lap two different toolpath. i have a radius surface that meets a flat plane surface and i want contour path to over lap or blend into the flat plane surface by .01 to .02 so there is no witness marks between the two paths. how or can i do this. Thanks