Thanks Pete

its there now pete ,thanks (rotate180.mcx)

sorry it took so long to respond i put 1 of the files on the ftp,(in the solids folder rotateme.mcx) when i rotate it i get the inside rads corupted they dont meet the angled walls ,also when i try to create a solid from these surface it gives me the message that there are serius faults in my solid . we still have a version of mr2 on one of our systems and it rotated the file with out a problem , once again sorry guys for not responding sooner i was in a hurry to start the weekend.

anyone had problems rotating igs files ,it currupts it every time i try ,i tried other files it does the same thing .

Pete can the default be "all files" in a certain directory

it happened to me for a while, and i changed video card drivers, nvidia 81.67 if you have an nvidia card ,this worked for me.

Chris it works great .. no more errors .

i did use the same instal for all 3 machines(win xp-64bit), we have 1 cpu that has win xp (not 64)and i installed it on that and it went great no probs.

speedybass ,whats the specs on your cpu.i have two cpus doin the same thing

i have 3 cpu's with dual amd opterons,and it only works on my system, all tree systems are the same (hardware) ,it seems like a dll issue.

chris alk works with me, i put. x2 on his system with admin priveleges and i got the same errors,but it loaded just fine on my identical system

WHAT!!

yes, much better performance we run 4 gigs of ram on our 64 bit systems, i dont think we will hit the terabyte for a while.

we have 3 xw9300 workstations,from hp dual core 64bit win xp 64 mastercam runs great i took the jump and i dont regret it. a couple bugs here and there but nothing that would make me go back.

i found a nice set affinity tool. if anyone is intrested ill put it on the ftp . if its up

is it back up

that did it , so is this a post or mcx issue or me? thanks for your help guys

work offsets only transform tplanes

tried the mpmaster still the same , could this be a setting in my control def/mach def

heres what i get when doin the above.......... G15 H1 ( 3/8 FLAT ENDMILL-1.0 FLUTE TOOL- 4 DIA.- .375) (ROUGH 2 CAVITIES FLOOR) N1 M356 G0 G90 X1.6345 Y-1.2405 S2500 M3 G56 Z.25 H4 M12 Z.1 G1 Z-.375 F35. X5.8905 Y-1.1345 X1.6345 Y-1.2405 X1.4658 Y-1.4092 X6.0592 Y-.9658 X1.4658 Y-1.4092 X1.462 Y-1.413 Y-1.578 X6.063 G3 X6.228 Y-1.413 R.165 G1 Y-.962 G3 X6.063 Y-.797 R.165 G1 X1.462 G3 X1.297 Y-.962 R.165 G1 Y-1.413 G3 X1.462 Y-1.578 R.165 G1 Y-1.7468 X6.063 G3 X6.3967 Y-1.413 R.3338 G1 Y-.962 G3 X6.063 Y-.6282 R.3337 G1 X1.462 G3 X1.1283 Y-.962 R.3338 G1 Y-1.413 G3 X1.462 Y-1.7468 R.3337 G1 Y-1.9155 X6.063 G3 X6.5655 Y-1.413 R.5025 G1 Y-.962 G3 X6.063 Y-.4595 R.5025 G1 X1.462 G3 X.9595 Y-.962 R.5025 G1 Y-1.413 G3 X1.462 Y-1.9155 R.5025 G0 Z.25 X7.875 Y-1.2231 Z.1 G1 Z-.7 X8.0482 Y-1.1519 X7.875 X7.7018 Y-1.2231 X7.875 Y-1.1875 Y-1.3075 X8.0498 G3 X8.1326 Y-1.2247 R.0832 G1 Y-1.1503 G3 X8.0496 Y-1.0675 R.0832 G1 X7.875 X7.7004 G3 X7.6174 Y-1.1503 R.0832 G1 Y-1.2247 G3 X7.7002 Y-1.3075 R.0832 G1 X7.875 Y-1.1875 X7.7374 X7.7006 Y-1.2243 Y-1.2246 X7.6998 Y-1.4757 X7.875 Y-1.4763 X8.0502 G3 X8.3013 Y-1.2249 R.252 G1 Y-1.1501 G3 X8.0498 Y-.8987 R.2519 G1 X7.875 X7.7002 G3 X7.4487 Y-1.1501 R.252 G1 Y-1.2249 G3 X7.6998 Y-1.4763 R.2519 G1 X7.875 G0 Z.25 (TOP SURFACE 2 WEBS LEFT CAVITY) X2.7994 Y-1.1886 Z.1 G1 Z-.455 X4.6606 Y-1.1874 X2.7994 Y-1.1886 X2.715 Y-1.273 X4.745 Y-1.103 X2.715 Y-1.273 X2.5463 Y-1.4418 X4.9138 Y-.9343 X2.5463 Y-1.4418 X2.3775 Y-1.6105 X5.0825 Y-.7655 X2.3775 Y-1.6105 X3.73 Y-1.2355 X3.355 G3 X3.73 Y-1.6105 R.375 G1 X5.0825 Y-.7655 X2.3775 Y-1.6105 X3.73 G3 X4.105 Y-1.2355 R.375 G1 X3.73 G0 Z.25 M9 Z20. X-20. Y10. M30 only one posts out it is set for 3 steps between points

still no luck i can get it to post but not with work offsets if someone has some time ill put it on the ftp site ...mcx folder ..mikesmess thanks

thanks Shawn

operation order transform should perform the ops selected and then transform,correct ,if so then its not working for me, translate ,toolplane,op order, assign new work offsets does anyone have an example i could look at? thanks

long word parameter 11.(disclaimer.."i think") 1,2, 0 are your choices i think thats the one . its been a while tho. you have to restart your machine afterword.

i got 3 , i feel spammed, j/k