sspv
-
Posts
8 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by sspv
-
we drilled 3550 hloes in pre h/t 4340, using 1/16 dia. guhring drills 5/8 dp. changing the drill every 70 holes. with only 4 broken drills. $8.44 per drill. then we tried a cheaper drill on the next part. $ 1.75 per drill same speed and feed. 3550 holes 20 broken drills. $500.00 t0 burn out the broken drills. I think the extra money for the drills pay for them selves.
-
give your sandvik rep a call they have a grade of insert for inconel, also kyocera has a good grade. we use the sandvik insert to cut inconel augers on our 4th axis with good success.
-
thanks guys, sorry for the spelling I thought it didn't look right.
-
Does any body out here use lagoon milling machines with a universal head.I am looking to purchase a machine with a 3 meter x travel.I would like some input on quality and reliability. The other option I have is Nicolas Correa, but one of our competitors is having drive problems with the correas.any input would be helpful. thanks
-
thanks john: I see how it works now.I thought it would use sub programs like the fadal post does ,it seems to be easier and alot less lines. thanks again
-
John: When does it kick out the 3 different offset?do you have to post it.
-
the problem i am having is where to type in the different locations.it looks like you have to have the vises at equal locations.
-
can someone tell me how to transform to 3 different locations one tool at a time.there are three different vises at different locations x y z.I can do it on my fadal with my sub post not having to use transform, but on my hurco this is a different story.I can do two locations but i can't get the third one to work. thanks in advance