Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
hi John
In the photobucket webpage under my account,I can see the pic and the bottom is url,tag and img addresses.I copy the url address and then goto Forum In the full reply form,I select img and it ask for address.I copy the address there,when I do so it only put he address like htpp--- but it didnot bring the picture,so here is my problem please comment
Hi Jmparis
I saw the file and op#46.I guess that is the good way to do at this situation.
Thanks for your help
My second question ragarding the photobucket print out stuff was,I did the same way as u write down but I can see only the address not he graphic print which I want to put with the post. Is I am thinking completely wrong way.
I saw many post with grapic windows,person want to explain more that way
please commnent
hi the genius guys,I am at the beginning of this topic,I was trying to the print screen of this dwg by using
gadwin print screen and photobucket.com .It is giving the link only and is not putting the print screen staight on the post as I saw in the forum many people are trying to explain with the grapic window in their post. Is any body can help me step by step
thanks in advance
hi,Iput my file on the FTP 20-1042_machining
op#45,right now the tool is entering the material from the pre drill hole but I was trying to do without the pre dril hole and tool should do machining in xyz
please have a look
hi guys, I am roughing out al hsg in x/sp2.In the attached dwg. there is post 1/2 dia. and 3inch high and is in 1.65" in pocket and which is also 3" deep. I am using 1/2 endmill and trying to find out way so the end mill take 3/8 depth of cut with going in x y and z move. I donot want to take helical entry as it will go only limited distance in x and y and will take the complete depth. Any suggestions please,thanks web page
Hi,Iloadedsoftware from photobucket.com and it ask for image to load and load the image file which I snap shot using the gadwin print screen. Now my question is the same as the previous one, how I can bring that picture in tbis post
please help me
Hi every body,
how I can print screen to put on Forum post.Ihave Gadwin Print Screen software loaded and I know how to print but donot know how to bring for post,please help me
hi guys, this is my first post.i am using mcamx,sp2.i want to do the drilling in the same sequence i select the entities (means without the sorting options)but in xver,if i turn off the sorting option, is not doing the drilling as way i select the points i donot know where i am doing mistake.please help me
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.