Elmo Crow X
-
Posts
51 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Elmo Crow X
-
thanks for the machine info its a start.
-
anybody out there doing diamond machining? what mill or lathe are you using? i am supposed to start up a process for this and am looking for any help available. thanks
-
how to transform toolpath twice or three time
Elmo Crow X replied to CNC-ERIC's topic in Industrial Forum
what if the vise is rotated 180 deg and you had 10 cutters and want them to run sequentially -
Yes MLS that is what i meant i am transforming toolpath. But in the post it is spitting out an A180. i only want to rotate program x and y 180. i get alarm at machine(machine does not support A)
-
i want to rotate the toolpath ONLY not the part not the fixture
-
I am trying to rotate my toolpath 180 deg. In my post it is putting out an A value. Is all i want is to cut the parts on the otherside of stationary 4 up fixture. What am i doing wrong?? I was using transform-rotate. Thanks for any help
-
how do i get mastercam to spit out lines insted of i&j. thanks for the help
-
got post tweeked and now those g values show up in program.will see how it cuts. thanx to all for the help
-
Thanx for the info, after looking up that switch and it being on (1) i am assuming this machine has the highspeed function. Could it be that my post is not posting that m code i am using a post modified by my reseller for this haas. Does anybody know what the m code would be and i could search the post the manual does not specify an m code for this at least not under "highspeed" or "lookahead" thanx to all for the help and information
-
do you know what the prameter code is?
-
Its a 2000 VFOE 20HP It is supposed to have it but i do not know what to look for I have not found any codes that turn on or off
-
got it thanx for the quick reply
-
how do i access the set up sheet in mcx. just downloaded and am unfamiliar with using setup sheet
-
where can i fine tune backplot for a more realistic time est. iknow i did it in ver9 but cannot remember where.
-
thanks
-
I have got a vfoe20 and am wondering if there is look ahead on this machine and where i can find itout what it is. Thanks
-
does anybody have a good reference for s&f for graphite high speed machining
-
i was wanting some info on the machine and got a lesson in lasers as well. all is appreciated.
-
anybody out their run one of these, wanting some feed back on your experience. thanx
-
Thank you John i knew it was something simple
-
can someone tell me how to turn of the little verify window when making trim break selection i turned it on some how and dont know how to get it turned off. thanx in advance
-
thanx john was missing the x+.ft file. works fine now
-
has there been an upgrade for x+ there set up sheet was the best. but i cannot get it to work with x2 it dogs my computer out almost to standstill.
-
X2 OPENING WITH A DIFFERENT MACHINE THEN THE DEFAULT
Elmo Crow X replied to DANC's topic in Industrial Forum
I had this same problem. My I.T. guy had all my permissions turned off had him give me the permissions now everything sticks -
i am cutting acvouple of pockets then contouring them. when i say it grays the tool out i mean in the actual geometry window. not in op manager.