Rick Henrickson The Boeing Co.
-
Posts
1,501 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Rick Henrickson The Boeing Co.
-
-
I am covering a new area this week they have an older Mazak with an M2 control, I used our M32 post but I keep getting an alarm 553 illegal data input
can anyone supply some sample code? is there a limit to G codes per block?
-
Most lathes experience this, if the x casting and headstock are not on the same casting it is common. we adjusted our Okuma LB10's till they warmed up. But The LC series share the same casting and grow and shrink together.
-
I can look tonight I may still have a factory manual for the 4 ax lathe. you should be using load monitor if you are pinch turning if 1 insert fails you could loose both pockets on the holders
-
weird there is no VMON either usually there is monitoring on all these turets
-
Barcode is lame!!!!!
you should remember the barcode problems with that other tool we worked on
Metal motion full up rfid hundreds of tools and pallets
-
Does anyone have an RFID scanner or barcode to check and make sure the right fixture is in the machine, horizontal vertical or any other expierence with this please share.
-
Colin it is not me! I wouldnt care but some people do
-
Thanks I will give it a go
-
that didnt work I think it has to be some verisurf setting
-
in the operations manager you have tabs left from right
Toolpaths Solids MBD Art
-
When one of the guys here launches mastercam it comes up on the MBD tab instead of the toolpaths tab in the ops manager how do I change this
-
Make sure to keep your WCS top
then create C and T planes at 90 180 etc
-
thanks james trying it tonight
-
Thanks Ron we will give it a look
-
ok please look at line N180 and N182
N170G3X28.1673Y6.733I28.556J6.8784
N172X28.3032Y6.5903I28.4419J6.8584F100.
N174X28.5817Y6.4699I29.1867J8.2527F560.
N176X28.7109Y6.4239I29.8285J9.7633
N178G1X28.7116Y6.4105
N180Z.6525---------------------here is the Z feed down point
N182G2X28.3236Y6.5532Z.6524I29.9944J10.4981-----z moves up .0001 here need a k or get it to not output the z .0001 move
N184X28.175Y6.6677I28.4623J6.8869
N186X28.1179Y6.8609I28.4564J6.856F100.
N188X28.119Y6.9229I29.2351J6.8712F560.
N190G1X28.0988Y6.9195Z.6525
if plane$ = zero,
[
if arc_pitch$ <> 0,kout = abs(arc_pitch$)
*iout, *jout, #kout #XY plane code - G17
if arc_pitch$ <> 0,
[
*kout
]
else,
[
kout
]
]
Any Ideas how to either get a k move
or
not post the z.0001 move
It must be a rounding error or something this is the first time it has happened
-
thank you very much
-
can someone please tell me root radius min max
-
I wish I had geomagic used it at metron systems when I was there. Thanks for the help though
-
Can this be done?
-
if you have any question on G and M code macros and library files let me know I would be glad to help you out
-
where I use to work A77 all 20k and wished we had more all Aluminum though
-
Thanks for the help Ron I apreciate it.
-
Catpart
-
this is an R19
Mazak M2
in Industrial Forum
Posted
Anyone?