bbrown01
-
Posts
35 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by bbrown01
-
I'm trying to progressively verify a part using multiple views/work offsets. I can "xform STL" the output from verify for each operation (into sperate files), but I can't figure out how to represent all operations in a single STL file. I could probably merge the seperate operations STL's using SolidWorks, but I would like to do this in Mastercam. Can you merge multiple STL files in mastercam and save it as a single STL? -Brian (X MR1)
-
"The fix requires one file to be copied to your mr1 updateservice folder. This file will be made available during the day (1/19/05) via Mastercams website." Hi Jim, Has this fix been posted or has it been included in the MR1 installs? I can't seem to find it on the Mastercam website. Thanks, Brian
-
Mastercam X MR1/SP2 Now Available
bbrown01 replied to Jim Evans from CNC Software's topic in Industrial Forum
Thanks Jim. We'll look forward to those downloads. -Brian -
Mastercam X MR1/SP2 Now Available
bbrown01 replied to Jim Evans from CNC Software's topic in Industrial Forum
Jim, Could you make the updated MR1 documentation (PDFs only) available as a download? In reading the "What's New" page there appears to be helpful information in those updates. Should only be ~30M and would save us from bothering our resellers -Brian -
I just received this from the Quality Control group at CNC. "This is occurring because there are no updates for MR1 at the time being. We are going to change the message that is received to something along the lines of "no updates are currently available" to avoid confusion. Thank-you." Not sure this makes me feel any better since others that have successfully ugraded to MR1 are not getting the same message. -Brian
-
>My install dir is C:Program Filesmcamx, not sure if it matters. I also installed (over the previous release) in C:Program Filesmcamx -Brian
-
Thanks gcode, Except for this (for now), everything appears to be working fine. -Brian
-
After updating to Mastercam X MR1 I get the following error message when running Update Manager. "The Update Manager could not locate the correct version of Mastercam X on your machine. You may need to run a repair operation from the Control Panel's Add / Remove Programss dialog. Please report this to [email protected] with detailed desc." Anyone else seen this? -Brian
-
Mastercam X MR1/SP2 Now Available
bbrown01 replied to Jim Evans from CNC Software's topic in Industrial Forum
Jim, Is it possible to get a listing of all the files (samples, PDFs, etc.) not installed/removed by this release? And is it possible to recover only these files from the original mcamx CD? I chose to install over my existing version and didn't expect all the samples, user documentation, etc. would be removed. I only expected this behavior if I installed in a new directory. -Brian