For anyone who's interested, here's the new listing. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...item=2020290071 Thanks, JFDI [ 04-27-2002, 11:01 AM: Message edited by: JFDI ]

Auction just closed at $2.25! I guess that my retirement plans are back on the front burner! I'll post a link to the next palet auction. JFDI Just Focus and Do It! [ 04-06-2002, 12:12 PM: Message edited by: JFDI ]

Here's a link to the new listing. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...item=2013628965 JFDI

For anyone in the Southern California area, you may want to check this out. Go to http://www.knfilters.com/EmploymentFiles.html I supervise the day shift in the K&N Machine Shop and we need CNC operator/Mastercam Programmers and a CNC Operator/Mastercam/Supervisor for the evening shift. I'll answer any questions that I can. re:permitted All official inquiries (resume's) must go thru our Human Resources Department. Please mention this posting. JFDI Just Focus and Do It!

Tried the Dutch thing. Sold two for a buck each. So much for the retirement plans. I'll send a bitmap image of the palet to any one who e-mails me. JFDI Just Focus and Do It

James, Thanks for the thoughts. Multiple sessions of Mastercam won't work? Sure, but because each session is attempting to sap all of your resources, the system slows. As far as setting the config file each time. Been there, done that. PITA! (Pain In The A**) For the cost of the software, it should save it itself. Haven't seen V9 yet. One can only hope a better program and not just the usual "Bells and Whistles" upgrade. JFDI Just Focus and Do It

Pretty sure it was late 1986. The year I met my wife. JD Tool in Riverside recieved their Mastercam from QuickSilver. About glitches. How about config settings that stay set after exiting? Also, how about opening more than one drawing,(like Solidworks.) Just a start. Later JFDI

Hello to all, Jim Lunger here. I'm the Machine Shop Supervisor at K&N Engineering. We make High Performance Air Filters for cars and motorcycles. I've used Mastercam for over 16 years. Back to Version 3.1. I sure wish that CNC Software would do a total rewrite! Mastercam is still just a DOS program that has been shoe-horned into Windows. My biggest beef is that Mastercam is the best CAM software out there and it's still full of glitches that a total Windows platform would solve. Ok, I'm off the soap box JFDI

WOW, Thanks for the plug! I had only been registered for a few moments when you posted this. That's fast! Anyone can develope one of these palets. It just takes patience and alot of time. I figure that most users don't have the spare time required to do this type of thing. That makes the auction a bargain. JFDI (Just Focus and Do It!)