HT
-
Posts
56 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by HT
-
-
I very happy with my FX4500, FX4600. My friend have FX4800 and they love it, If up to me i would use those cards on 64bit systerm with 16gig or more.
How things going Mike?
-
Thanks
-
-
Look for feed rate limit under mahine Def.
-
If you created a view using 2 line method, that view will associate with those 2 line so where ever you move or rotate those line your view will go with them. HTH
-
Well, SlJ i don't know if i can help without look at your .MMD and .PST file, i think you may have program your B0.0 at WCS-top C-top and t-top. good luck. HT
-
Look into HMC-B properties change Axis of rotation to Y+; 0 deg. possition to Z+ to see if it work.
-
Try use mill 4 axis horizontal MMD, change your 5ax drill toolpath to WCS-Top C-Front T-Front and see if you get the code you want .
-
Thanks.
-
All the operations had the same NCI file name?
-
-
Dave, try this:
#Output formatting
top_map : 1 #Output toolplane toolpaths mapped to top view
-
Dave, i maybe wrong. Your machine is table-table i don't think you need G68.2 at all, if you program tool tip you need G43 for positioning like a horizontal and turn on G43.4 for 4 and 5-axis simultanous toolpaths.
-
How about fews point toolpath before that 5 axis cut:
1. Point tp at A-45.
2. Point tp at A-45. C50.
3. Point tp at A-45. C130.
4. Point tp at A-45. C180.
HTH
-
Look like you need to reset misc value of that tool path.
Work Coodinates(0-1=G92,2=G54), right now it may set at 0 try change to 2 see if it work. HTH
-
G you are right,Control def. does not affect NCI output, Parameters setting of diffirece type toolpath does. I have dif. op. defalt file for dif. machine because of this reason.
-
Melliott6, Icam should taken care every thing for you. To me the most important thing you need in Machine Def. is control file. Once you map all association files for that machine : tool, op. etc. the rest is up to Icam. HTH
-
Seem like You will have a good time .Enjoy your new Toy, i like Makino more than any others machine i ever worked with. Good choice
-
I use misc values for this.
-
I had this problem once. what i did is i deleted some of the macro in master config that i don't need and add what i want from there. HTH
-
How about change your ball dia. to smalller size like 5/16, 1/4 or even 3/16 ;Rotate your cutting angle 25.0 to 45.0 from where you at ;turn off your filter and set total tolerance to 0.0001
HTH
-
How about G52
-
-
Check holder.mcx in you tool lib. where your file map to.
HT
status bar level number/name width
in Industrial Forum
Posted
You can torgle "Display level name" under Systerm Configuration, Screen. Mastercam will show your active level name on the sreen. HTH