I have adjusted the slide bar but no matter where it placed backplot runs the same slow speed. What ama I doing wrong. Verify work fast!

I am using a 6" Diamond wheel to grind High Purity Quartz glass. I need to mill: x7, y0, z0. x7, y0, z-1. then x7.01, y0, z0. x7.01, y0, z-1. then x7.02, y0, z0. x7.02, y0, z-1. It seems simple enough. But I want to use cutter comp to change the x7. number to a differnt number, say x7.002 or x7.004 so that the operator can use cutter comp. to change the final size. Thanks for any help Carl Matthews Fadal VMc 8030 Mastercam Mill Level 3 Tosoh Quartz

Working in Version 9 I could use screen-change color-result. How do i change the color or level of a result in mx2 sp1? Thanks

Thank You for this program. I used it in X+. but did not mention my appreciation to you. Thanks Again!

The same cutter cuts 4 seperate contours.I want it to stop between each contour so that clamps for holding down the part can be added. I want the operator to only push the go button in between cuts and not load another program. x2sp1 proto trak mx3 mill Thanks

Thanks Zero, that did it for me!!!!!!!

When I run backplot-verify it seems to be on or off. It does not follow tool. I can not trace verify around the part. Its off or finished. I did not have this problem in X. Any ideas? Thanks