Let me try it like this. If you can imagine the dome af a baseball cap ontop of the square box.

Sorry about that. What i want to do is draw in either solids or surfaces. I need to draw a box that is 6.35mm square. and have the top of the box have a 5mm rad on it. Then trim them together so the rad is still a sphere shape with no flats on it.

Would anyone tell me the steps to put a 10mm rad on a 6mm box and have it trimmed please. Using Mastercam X

Thanks for the help I thought they had cimco on the floor but they are using Mastercam X editor and the only thing that comes up under nc functions is +0 +Z find XYZ EXTENTS Sorry to waste your time Stephen

Thanks for the help. Where on the cimco editor is that icon?

MY CODE LOOKS SOMETHING LIKE THIS G01 F10.X1.0 Z1.0 Y25. BLANK LINE BLANK LINE X3.0 Z1.0 Y25. BLANK LINE BLANK LINE X3.0 Y30.

Does anyone know why I get empty lines between the lines of code when I save a program from the machine onto my card? I would like to get rid of the empty lines to make it easier to check when I go to use the program again... Using Mastercam X Machine is a Matsuura MAM700HG 4th axis

Thanks again guys...

Thanks Hardmill I will check it out.

Does anyone use the 203 Turbo system with their machines. We bought 2 new Turbo systems for our new machines. We machine gray cast iron. These machines run 24 hours a day. The bottom of the coolant tank fills up with little particles that pass through the filter and settle on the bottom. Each month we have to drain the coolant tank to clean it. Does anyone know of a better way to clean the tanks

Thank you for the help

Sorry guys i must of been a little sleepy when i posted this topic. I meant over lapping entities.

Does anyone know how to get rid of Duplicate entities? I am pretty sure i have used it before at one of my other jobs. The only thing is i keep using different versions of the software.Right now im using Mastercam X.

Does anyone out there know how to get rid of duplicate entities. I could of swore I used it before in this software. I am running Mastercam X

Thanks for all the help guys....