Clayton aj M
-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Clayton aj M
-
Let me try it like this. If you can imagine the dome af a baseball cap ontop of the square box.
-
Sorry about that. What i want to do is draw in either solids or surfaces. I need to draw a box that is 6.35mm square. and have the top of the box have a 5mm rad on it. Then trim them together so the rad is still a sphere shape with no flats on it.
-
Would anyone tell me the steps to put a 10mm rad on a 6mm box and have it trimmed please. Using Mastercam X
-
Thanks for the help I thought they had cimco on the floor but they are using Mastercam X editor and the only thing that comes up under nc functions is +0 +Z find XYZ EXTENTS Sorry to waste your time Stephen
-
Thanks for the help. Where on the cimco editor is that icon?
-
MY CODE LOOKS SOMETHING LIKE THIS G01 F10.X1.0 Z1.0 Y25. BLANK LINE BLANK LINE X3.0 Z1.0 Y25. BLANK LINE BLANK LINE X3.0 Y30.
-
Does anyone know why I get empty lines between the lines of code when I save a program from the machine onto my card? I would like to get rid of the empty lines to make it easier to check when I go to use the program again... Using Mastercam X Machine is a Matsuura MAM700HG 4th axis
-
Thanks again guys...
-
Thanks Hardmill I will check it out.
-
Does anyone use the 203 Turbo system with their machines. We bought 2 new Turbo systems for our new machines. We machine gray cast iron. These machines run 24 hours a day. The bottom of the coolant tank fills up with little particles that pass through the filter and settle on the bottom. Each month we have to drain the coolant tank to clean it. Does anyone know of a better way to clean the tanks
-
Thank you for the help
-
Sorry guys i must of been a little sleepy when i posted this topic. I meant over lapping entities.
-
Does anyone know how to get rid of Duplicate entities? I am pretty sure i have used it before at one of my other jobs. The only thing is i keep using different versions of the software.Right now im using Mastercam X.
-
Does anyone out there know how to get rid of duplicate entities. I could of swore I used it before in this software. I am running Mastercam X
-
Thanks for all the help guys....
-
Heres the thing i have never done this before.I seem to be having trouble with sharp corner when i try and loft the surface.I know if i could send this file to someone they could explain to me how to do it. I just have been out of this software for too long i guess.
-
I have to say thanks to everyone giving me advice.What i have is actually the tool path that the cutter took when running over the part.I just didnt know if there was a way to cover the tool path with a surface with little effort or if i had to sit down and draw each surface.Its been along time since i have used this software.Jim i kind of get what you are saying but im not that advanced in this software.Is there anyway i could email you what i have,you could look at it and tell me if it can be done.
-
New PointCloud chook for Mastercam
Clayton aj M replied to Verisurf - Ernie Husted's topic in Industrial Forum
i tried to use a loft surface and it gave me a sharp corner error. Is there anyway i can put the file on this site so everyone can see what im working with???????? -
New PointCloud chook for Mastercam
Clayton aj M replied to Verisurf - Ernie Husted's topic in Industrial Forum
Ok this ones for Ernie,or anyone else who might be able to help. My boss bought a cnc machine with a digitizer on it.He says we should be able to create a surface from the geometry we get from the machine..Any clue on how this is done?????????? Can i just use mastercam and turn the lines into surfaces or is there another software i have to use to create the surfaces. I dont know anything on this subject and cant seem to find any help on the subject,except when someone said i should be talking to u.. -
So what your saying is, if i digitize a die piece using the cnc machine i cant turn that to surfaces using mastercam? I have to get the company to buy more software?
-
Yes but this really isnt my line of work im just trying to solve a problem we run into. Any hints on finding the info would be greatly appreciated.
-
Someone has to know how to do this..... How to make surfaces from something that has been digitized. What im getting on file is a part of a die that has been digitized on a cnc mill.What i need to do with it is cover it with surfaces.Is there a quick and easy way of doing this.
-
Someone has to know how to do this..... How to make surfaces from something that has been digitized. What im getting on file is a part of a die that has been digitized on a cnc mill.What i need to do with it is cover it with surfaces.Is there a quick and easy way of doing this. [ 05-20-2007, 03:18 PM: Message edited by: Clayton aj M ]