HELP! this is for Horizontal From the system view I used TOP WCS (OP1 WCS) for my first OP, ALL T/C PLANE WORKS FINE then I created and 2nd WCS (OP2 WCS) in the same program for my second OP, then in view manager i chose relative to 2nd WCS then i got my front, left and right view but then when i chose it it said that its """""not save,"""" this reason is to quickly access to my op2 front, left and right with hot keys that i've been setting up. HELP !!!!!!!!!!!

Bob, all the G65 lines are in the Haas 's manual for probbing or the 9000 sub call out, well to skip reading thru the manual, what you can do is creat the probinng, tool 's probbing on the software that came with Haas, then run it thru MDI, and you will actually see what the commands are, you then can either add one of the lines as " Manual operation" before the tool change of each tool, or before 1st tool of your program, it very helpful in some ways, well that the way how I did it, and it seem to be working fine....

Thanks CNC Apps Guy what I did today: - I called YCI Supper Max give them my machine's serial number my company 's info and my email addy. - One of the YCI 's technician will email me the "Parameter at point of sale and the instruction how to get it back into the machine" well for the other stuff I have to set it again which is no big deal... just the communication baud rate/ couple other optional M code... I thought i would share it with you guys, I learn a big lesson here like CNC App Guy said " BACK UP ALL YOUR PARAMETERS" I didn't know it was so so so important until yesterday... total waste of 16 hours of machine time...

Thanks ShefferCNC, I'll be sure to do that

Thanks Guys I found out how to fix the problem 1.) to Call YCI Supper Max to get the parameter at time of sale 2.) I found this http://www.machinetoolhelp.com/Procedures/...zeroreturn.html I thought I would share it with you guys thanks for all poster to this topic...

Chris, do you have the phone number? email address? thanks

Anyone in here have the same problem? please help thanks in advance

Remember to space it out right...

check you post u must did something wrong there here is mine this for 3axis Mill # Tool Comment / Manual Entry Section # -------------------------------------------------------------------------- ptoolcomment #Comment for tool # comment$ pcan, *n$, sopen_prn,*t$, sclose_prn, e$ tnote = t$, toffnote = tloffno$, tlngnote = tlngno$ if tool_info = 1 | tool_info = 3, sopen_prn, pstrtool, " - ", *tnote, " - ", *toffnote, " - ", *tldia$, sclose_prn, e$ pcan, "G0", "G91", "G28", "Z0", e$ pcan, "G40","G80", "G90", e$ ptooltable #Tooltable output sopen_prn, *t$," - ",*tldia$, " - ", tlngno$, " - ", pstrtool, [if comp_type > 0 & comp_type < 4," - ", *tloffno$, " - ", *scomp_type, " - ", *tldia$], sclose_prn, e$

LOL @ Mark.... heheheh it was an accident...

I know about the parameter disk on HAAS but not the FANUC...

Thanks John, is that the ONLY way? can i down load it from any where? because i'm on the phone with one of the Super Max 's guy now... Help!!!!

-----One of my operator accidently erase all of the memory/parameter/everything on the Super Max F102 with Fanuc 18-M . He was trying to to a hard reset but some how, now everything is gone, I can't even get the machine to move, all I see is the screen and the the " EMERGENCY flasing", with out the E-button press I can't do anything,---- First question: - Do I need the factory 's param/setting? or Can I just set everything again? I don't want to waste time on calling the service guys, you guys know how they are, it gonna take them 1 day just to take out all the stuff, 1 more day to diagnos and the 3 rd day to tell you what really going on.. that total to be 3 days down time... 2nd question: Is there a way that I can download the parameter and download to the machine again? or my only choice is thru service man??? Needing help.... ANY IDEAS WILL BE VERY APPRECIATED... THANKS AHEAD OF TIME

thanks Flycut,

Thanks Colin, I had the same idea for 2nd op, but the first op, you got me going faster now. thanks again,oh on the 45 deg angle it does have a radius .125 at the blend, i got that with 1/4 ball thanks for pointing that out... for some reason i can't post the file on the FTP site, once again thanks for leading me to the right direction