ericncmfg
-
Posts
28 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ericncmfg
-
Anyone out there have a TNS-1A our E prom chip failed and need to duplicate one , Manufacture doesn't have any and doesn't support the machine anymore.
-
Got it ,,,,,,,,,Thank you.
-
What would cause a solid model to Regen and looks correct on the screen , But still shows an X on the tab. No errors
-
VPN access with a HASP key, not netHASP
ericncmfg replied to John @ High Tech Machine's topic in Industrial Forum
You will have to switch over to a software license. To use a VPN ,You have to have 2019 or newer and home computer needs to be able to run Mastercam. Otherwise you can remote desktop in. -
VPN VS REMOTE LOGIN MASTERCAM USE AT HOME
ericncmfg replied to ericncmfg's topic in Industrial Forum
With the VPN , Do I have to change anything on my Hasp? We currently have a nethasp. -
What is everyone's preference on using VPN or just remote log in? I use Mastercam at home with remote log in and wireless, it is little slow and switching between screens is a pain.
-
Good Morning. Is anyone using a curved monitor ?
-
Looking for a good set-up to run Mastercam or some settings I can change . This is what I have now and stock model re gens take forever. I have Nivdia Quadro FX 1800 ..
-
Thanks guys
-
I am not a lathe programmer . Ours is out on baby duty , I have Copper I want to thread mill the ID but my only machine open doesn't have Y axis. I do have live tooling. We have single pointed and it is a hassle with chips. Can I thread mill with this machine
-
Can you create custom tabs for Drawing instead of back and forth between all the tabs ?
-
Please ♥ put ♥ this ♥ as ♥ your ♥ status ♥ for ♥ one ♥ hour ♥ if ♥ you ♥ or ♥ someone ♥ you ♥ know ♥ has ♥ or ♥ had ♥ cancer. ♥ My ♥ prayer ♥ is ♥ that ♥ in ♥ 2011 ♥ a ♥ cure ♥ will ♥ be ♥ found. ♥ Will ♥ you ♥ post ♥ it ♥ for ♥ just ♥ one ♥ hour? ♥ Do it for all of us!
-
[Poke] me if you ever had a crush on me or still do..[LIKE] This status if you think I am a good friend..[MESSAGE] me if u ever wanted a relationship with me..I wont tell anyone.[COMMENT] On this if we have had good memories..NOW LET'S SEE WHO'S BRAVE ENOUGH TO COPY THIS AND PUT ON THEIR STATUS! I was brave enough!!!! Are YOU??
-
I know about dell outlet. I was looking features.
-
I looking for a new dell desk top under 1,500 Any features you guys recomend.
-
We have a elox with 3r tooling system. We are able to burn threads using the rot. head. But beleive me it is not fun. I would look for a good used one.Unless you have a lot of work for it. Stay away from elox.
-
Rob. Thats probly true. It is a short. With you sitting in that metal chair. OH YOUR WORKING THE NEXT TWO SATURDAY!!!!!
-
This is a mastercam program. The program stopped on the line with the alarm. There is no number program with to many digits.
-
Hey guys we need some help. We have a alarm of 242 on a haas. We are 2 hrs into the program. We also ran a set-up peice alot shorter with no problem. 3 oper. rough prefinish and finish. Alarm 242 ( no end ) Check input file for a number that has too many digits.
-
John I haven't been able to do this yet. We are using it to dnc. I will let you know how it works out. Thanks.
-
x2mr2 vista ultimate
-
How do I change the nvidia quadro card to solidworks. Any suggs on making it run the best. I'm new to window vista so be kind. Talk if I was 3 yrs old.I have already checked the disable hardware acceleration box. Thank to Barefoot cnc.
-
On the Dell M6300? The video card it reads 512MB NVIDIA QUADRO FX 1600M TurboCache (256 MB descrete) Not sure what that means. DESCRETE. It has 4GB d=DDR2 SDRAM 677MHz (2 DIMMS) and 2.5GHz 6M L2 Cache 800MHz We are only using this for Master cam and to dnc from.
-
What would be a good laptop to run x3? We do alot of 3D and need something fast regen.
