we do extrude hone the parts to get a 2-4 finish we just need the part to come off the machine at a 8-12 finish or the hone and polish takes to long

will i cant get a pic to upload to the ftp but the .182 hole has 2 .177 holes that intersect it one at the top and one at the very bottom so the bottom is almost L shaped right now we are useing a .182 ball reamer but the scrap rate is to high

if someone can tell me how to upload a pic i will so you can see what it is that i need to do

sorry 316 vim var steel

i have a part made out of 316 vim bar and i need the best finish i can get like and 8 or 12 at the max in a .182 hole w/ a .182 radius at the bottom it is 1.0440 deep my though was to use a ball burr mill but i am new to steel so any input would be grate

vprt=8 is what outputs the a.mdf file to my md1 folder i want to change the a.mdf to like frist_part.mdf see it is the name of the file that the vprt=8 puts out that i want to change

sorry the vprt=8 is what outputs the a.mdf file

i made a gauging programe for our okuma and it worked grate but when it outputs the resolts it only out puts the file as a.mdf is there away to change this here is my program (1-2-3 BLOCK GAUGING) (PART ZERO IS BACK LEFT CORNER) (Z ZERO IS 1.00" ABOVE TOP OF PART) IF[VATOL EQ 32] N11 N1 T32 M06 ( 1/2 CENTERDRILL) N11 M01 (MAX - Z.1) (MIN - Z-.125) G15 H1 G00 G17 G90 X.5 Y-.5 G56 H32 Z.1 CALL OO10 PMOD=3 PEI=-1.0 PEE=.01 PUDT=-0.9 POVT=1.011 VNUM=1 PF1=F25. PF2=F10. PF3=F5. G0Z0.1 X2.95 CALL OO10 PMOD=3 PEI=-1.0 PEE=.01 PUDT=-0.9 POVT=1.011 VNUM=1 PF1=F25. PF2=F10. PF3=F5. G0Z0.1 Y-1.95 CALL OO10 PMOD=3 PEI=-1.0 PEE=.01 PUDT=-0.9 POVT=1.011 VNUM=1 PF1=F25. PF2=F10. PF3=F5. G0Z0.1 X0.5 CALL OO10 PMOD=3 PEI=-1.0 PEE=.01 PUDT=-0.9 POVT=1.011 VNUM=1 PF1=F25. PF2=F10. PF3=F5. G0Z0.1 X-0.150 Z-1.25 CALL OO10 PMOD=1 PEI=0 CALL OO10 PMOD=15 PAXI=1 G0Z0.1 X3.15 CALL OO10 PMOD=1 PEI=3.0 CALL OO10 PMOD=14 PAXI=1 PE=0.01 PXCI=1.5 PXCE=0.02 PXLI=3.0 PXLE=0.01 G0Z0.1 X1.50 Y0.15 Z-1.25 CALL OO10 PMOD=2 PEI=0 CALL OO10 PMOD=15 PAXI=2 G0Z0.1 X-2.15 CALL OO10 PMOD=2 PEI=2.0 CALL OO10 PMOD=14 PAXI=2 PE=0.01 PYCI=1.0 PYCE=0.02 PYLI=3.0 PYLE=0.01 G0 Z0.1 G30 P1 G90 VPRT=8 M30

i just got a dell laptop with windows vista home premium edition will mastercam run on it?

when i set every thing like sfm, fpt, # of flutes, anf then i go to update the tool and all is good and set hit the green check the click on the tool and all the settings go back to the defaults now i have it set to read from tool in the control def where am i going wrong?

Thank you all very much for your help i have it up and running now

i just got an okuma46 vae osp200 and need to make a post and i need help mostly with the wcs i need the G54 changed to G15 h_ were h is = to the work offset help thank you

this is what i have N1 T1 G100 M06 ( 1/2 FLAT ENDMILL) G00 G17 G90 G54 X.3036 Y2.6669 S1069 M03 G44 H1 Z.25 M08 Z.1 G00 Z.25 M09 M05 G91 G28 Z0. M01 N5 T5 G100 M06 ( 1/4 FLAT ENDMILL) G00 G17 G90 G54 X.5536 Y1.5419 S2139 M03 G44 H5 Z.25 M08 and this is what i am looking for N1 T1 G100 M06 L5 ( 1/2 FLAT ENDMILL) the L5 prestages the next tool N5 T5 G100 M06 ( 1/4 FLAT ENDMILL)

yes i do!! lol

i need the post to output a lxx xx=next tool can it be done? useing a mpmaster post w/ mcamx3

thank you that worked

MPMASTER AND X3

I NEED TO REMOVE M9 AND CHAGE M5 TO M95 ANY HELP

thank you

in tring to edit a Generic Fanuc 4X Mill and i can not fide that line in the post

i need to set the sequence numders at the tool change only any help?

the code is right and the control is osp p200

i can't find it in any of the manuals and i can,t find the alarm list in any of the manuals

new to the okuma and i can not get it to start up it gives me an alarm 0721 devicesnet error 24e8004 'ch2 sc4' any help would be grate

k11.7 from 0 to 1 when m00/mo1 is specified, the saftey door is unlocked