Thanks a lot JParis. I do appreciate it. Best Regards Son Vo

Thank you very much. I got it. Thanks a lot. Best Regards Son Vo

Thanks for your help, yes I planning holding the part on 5 axis machine but the head rotation ( B AXIS) is not full rotary. Thanks. Best Regards Son Vo

Hello MasterCam User! I'm asking for your help, I want to do 4 axis engraving on the 20deg. bevel of 5 inch O.D. Any help would be greatly appreciated . Best Regards Son Vo.

Thanks a lot for your help. I do appreciate it.

please attached if you could create a boundry for the pockets. Thanks 209462-1_REV_A.MCX-6

My license doen't have solid all i have is surfaces. Is that a problem.

I don't know why it only create the outside boundry. Best Regards SVo

Dear MC User, How to create 2D boundary at the current Z depth in the current Cplane for the pocket. Thanks for your help. Best Regards SVo

I would like to say thanks a lot for your input. I do appreciate it. Best Regards. SVo

Dear MasterCam User, I want to do a dynamic area mill on P550 material and can't seem to find any samples in the dynamic mill Database.Plan on using a 5/8 5 flute high performance end mill.Any recomendations on step over and speed and feed?

Thank you very much. I do appreciate it. Best Regards SVo

Dear MC User! I have tried to drill 8 hole rotate about the X axis, but some how it drill only 5 holes event I have selected 8 holes. Any help would greatly appreciate it. Best regards Son Vo

Thanks for your help. I will try. Thanks Best Regards Son Vo

That's Fadal. Thanks

I have tried that but it still don't work. ( no luck

Dear MC User, Would you show me how force the feed (DPM) output at lead in/out for me. Thanks for your help. N100 O0000 ( TEST FEED DPM ) N110 ( CREATED ON 05-27-11 AT 7:14 AM ) N120 ( MCX FILE - C:\MCAMX\MCX\DD\TEST FEED DPM.MCX ) N130 ( NC FILE - C:\MCAMX\MILL\NC\TEST FEED DPM.NC ) N140 ( MATERIAL - ALUMINUM INCH - 2024 ) N150 G20 N160 G0 G17 G40 G49 G80 G91 H0 E0 Z0 N170 ( 1/2 FLAT ENDMILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA - 0.5 ) N180 T1 M6 N190 G0 G90 S1800 M3 E1 X2.1213 Y0. A-81.028 N200 H1 Z3. M8 N210 G91 Z-.9 N220 G1 Z-.35 F10. N230 X-.3535 A10.128 F215.6 <<<<<< output feed DPM here. >>>>>> N240 X-1.9446 A55.707 F215.6 N250 X.1768 A5.064 N260 X1.9445 A-55.707 N270 X.3536 A-10.128 F10. <<<<<<< remove feed IPM here. >>>>>>>>>> N280 G0 Z1.25 N290 M5 M9 N300 G90 H0 Z0. N310 E0 X0 Y0 N320 M2

Dear MC user, I'm asking for your help. How do I create 3D fillet? Any help would be greatly appreciate it. Best Regards Son Vo

Thanks, I have fixed my error, now the message gone away. Thanks again. Best Regards SVO

Dear MC USER, How cuold I turn off the messages " error were detected during posting"? Thanks for your help. Best Regards SVO

Thanks a lot for your help. Thanks.

Dear MC User, Would you show me step by step how to select all the same size of the holes at the same time on the drilling operation. Thanks. Best Regards SVo

Dear MC User, I'm looking for the Tosnus post for my HMC. Any Help would greatly appreciate it. Best Regards SVo [email protected]

Thanks a lot Del. Regards SVo

Thanks a lot John. Best Regards Son Vo