vpricky
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by vpricky
-
X4 mr1 Mill3 with solids and 5 axis I used a customers .stp file to generate a pretty elaborate 3 axis program and my tool path has facets instead of G2 and G3 codes. I tried all the filters (or so I think) but I still have the facets (smaller or larger, but still facets instead of arcs). I have a profile of .014 tolerance (+/-.007)from the actual model. Ay suggestions of what I can change to force G2 and G3 codes?
-
looks like it is going back to the store. Thanks for your help.
-
Would that be graphic display adapter? If so it is an Intel series4 - Brand new system!
-
I purchased and installed a new Logitech Laser mouse today. Downloaded newest drivers - solved erratic problem, BUT still no windowing. Anybody have a suggestion - I must be missing something here. X4MU2 was downloaded direct from mastercam site. I did this at work also and everything runs great there.
-
X4 Mu1 - I cannot window with mouse. Also mouse seems erratic. System says "best driver is already installed". Advice?
-
Similar problem, except mine won't drag a window