ziko1
-
Posts
23 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ziko1
-
i'll check it out and i'll come back to you. Thanks
-
on the server pc, everything is set up correctly, i open mastercam i see the splash screen it disappears and nothing else happens. I run a nethaspx and it say nethasp found.
-
I finally got the confirmation, we can't do transform/rotate in advance 5 axes on the the conert to 5 axes toolpath. thx anyways.
-
hello, i converted a 2d toolpath into a 5 axes using the 5axes advance convert 2 5 axes. Trying to do a in the Roughing section Transform/Rotate but nothing seems to work, i have the good axis rotation the good base point, i gave it the steps i need nothing seems to work.I'm short in ideas. thx for the help
-
Hi, i run mastercam on a nethasp licence. I open up mastercam, i see the splash screen and suddenly masetrcam closes by itself. This on the local. on the network everything works perfectly. anyone has an idea why this happens.
-
i copied it too but i had no success
-
Hi, i need help. i want to send my .eia file to my mazak fusion 640m controller using camlink. I can see the .eia extension but it won,t send it. Does someone have a specific procedure to send my files. Thanks
-
I'm using the FBM Drill
-
Does somebody know how to use this new option 'cause i'm having some issues with it; like it doesn't recognize the tools from a specific library i'm using.
-
no G02 and G03 on art operation in XZ and YZ plane
ziko1 replied to ziko1's topic in Industrial Forum
how do i attach a file -
no G02 and G03 on art operation in XZ and YZ plane
ziko1 replied to ziko1's topic in Industrial Forum
still won't work -
it seems that i'm not able to get G02 and G03 on the XZ and YZ plane even if my filter is on. I'm using art in x3
-
it didn't work. I reinstalled everything and nothing seems to be working. One more thing, my IT takes control of the computer by remote and he is able to open Mastercam, am i missing something here...
-
it didn't work unfortunatly it did create a new folder of config, and now it won't open and it says unable to open file C:MCAMX3CONFIGMASTERCAM.KMP
-
i'll try it thx
-
"Mastercam.exe-Fatal Application Exit; Unhandled Exception occurred - MasterCam halted" I get this message when i try and open X3, everything was fine yesterday and know i get this everytime i try to open it. HELP...
-
Thank you Glenn, it finally worked for us.
-
We are using the cimco that comes with mastercam all user are having problems using cimco
-
I'm using Cimco edit V5, and in Nethasp, the message i get is Mastercam Hasp not found, i checked in the nethasp.ini and everything is linked correctly to the license key, and mastercam x3 detect them. But when i generate my codes it gives the message. I need to find i solution, it seems that everything i try won't work.
-
where do i find the troubleshoothing in the common/editor/cimco edit file, is it there
-
yes it is licensed to my computer... well i guess because i can work with X3, otherwise i would have a Sim not found message when i load mastercam.
-
i work with the nethasp, it gives me this message on any computer that connected with my server
-
[email protected] I work with MC X3, and when i edit, i use Cimco edit. It always worked but yesterday, i gave me this message when i tried to edit my file, Hasp not found, can somebody please help out, y=thank you in advance